Home > News > Content
Aluminum Composite Board By Use Which Is Divided Into Several
Aug 18, 2017

Aluminum composite board is mainly used for civil construction, vehicle and ship decoration, refers to the plastic as the core layer, the 3 layer on both sides for the aluminum composite plate, and the surface of the product is covered with decorative and protective coatings or films (if not specified is known as the coating) as decoration products. From the use of the general also have different, mainly divided into the following:

1. aluminum plate for building curtain wall: the minimum thickness of the upper and lower aluminum sheets shall be no less than 0.50mm, and the total thickness shall be no less than 4mm.  Aluminum material should meet the requirements of GB/T3880, generally use 3000, 5000 and other series of aluminum alloy sheet, coating should use fluorocarbon resin coating.

2., outer wall decoration and advertising with aluminum plate: upper and lower aluminum plate with a thickness of not less than 0.20mm of rust proof aluminum, the total thickness should be no less than 4mm. Coatings are usually made of fluorocarbon coating or polyester coating.

3. indoor aluminum plate: upper and lower aluminum panels are generally used for the thickness of 0.20mm, the minimum thickness of not less than 0.10mm aluminum plate, the total thickness is generally 3mm. The coating is made of polyester coating or acrylic coating.

Aluminum composite panel is widely used and promoted by many industries because of its wide range of applications.