Home > Product > PVC Mouldings

No Rot White or Colored Mouldings Like Crown, Casing, Brick Mould or Sill

No Rot White or Colored Mouldings Like Crown, Casing, Brick Mould or Sill
Best Extruder Cincinnati from Austria
Raw material auto mixing system introduced from Germany
Strict lab check for every batch of raw material
Product Details:

Company profile

company profile 2_副本.jpgCompany profile1_副本.jpg


About BOTO

Boto plastics is one of China's leading manufacture for pvc sheet, pvc trim board and pvc mouldings. As a part of BTSY Group, we have two factories throughout the south and the north part of China, cover over 100,000sqm with top brand facility like cincinnati extruder, total 29 production lines. For over 10 years, we have been an innovative worldwide provider of PVC substrates solutions for a wide range of customers and markets.

 

Boto Facilities

boto facilities 1_副本.jpgboto facilities 5_副本.jpgboto facilities 6(001).jpg

boto facilities 4_副本.jpgboto facilities 3_副本.jpgboto facilities 2(001).jpg


Best Extruder Cincinnati from Austria                             

Raw material auto mixing system introduced from Germany

Strict lab check for every batch of raw material

 

Product Decription

PVC Moulding

product description 1_副本.jpg


BOTO Moulding is the perfect replacement for wood,

with features of eco-friendly, lifetime never rot, low maintanance, moisture & termite proof, easy install,does not promote mold or mildew, save time/laber with high energy efficiency. Not easy to scratch.No painting required unless desired. PVC moulding is widely used in construction and house decoration.

 

Application

PVC Moulding and PVC trim board are widely used in house interior and exterior decoration.

application 1(001).jpgapplication 2(001).jpgapplication 3(001).jpg

QQ截图20170818100930_副本.jpg


Installation Guide


cutting.jpgDRILLING(001).jpgNAILING(001).jpg
Cutting

BOTO Trim and Moulding products can be cut using the same tools used to cut lumber.Carbide tipped blades designed to cut wood work well. Avoid using fine tooth metal cutting blades

Drilling

BOTO Trim and Moulding products can be drilled using the same tools used to drill lumber. Drilling BOTO Trim and Moulding products is similar to drilling a hardwood. Care

should be taken to avoid frictional heat build-up

Nailing

BOTO Trim and Moulding products can be nailed using the same tools used to drill lumber. Nailing BOTO Trim and Moulding products is similar to drilling a hardwood.


Packing

Packing


Certificate

Certificate



FAQ

- What types of fasteners can I use with BOTO Moulding and Trim Board?

You will want to use the same fasteners you would use for installing wood, standard nail guns work well with BOTO Moulding and trim board. IMPORTANT: Staples, brads, and wire nails should never be used. These products have shanks that are too small in diameter to control the thermal expansion and contraction properties of BOTO Moulding and trim board.


- Do I need to paint BOTO Moulding and Trim Board?

BOTO Moulding and Trim Board usually do not require paint for protection, but may be painted to achieve a custom color or to cover nail holes that have been filled.


- If I do paint, what type of paint should I use?

For white or light colors, we recommend a high-quality, 100% acrylic latex paint developed for TRIM. There are paint

manufacturers that sell coatings specifically designed for PVC trim and mouldings. These paints are typically referred to as “vinyl safe” or “heat reflective.”


- Can BOTO Moulding and Trim Board be used in structural application?

No, BOTO Moulding and Trim Board cannot be used in structural applications. BOTO Moulding and Trim Board products can only be used as the decorative part of your application; either wood or metal structural components need to be incorporated for structural applications. Check with your architect or builder if your application is structural.


- What can I use to fill nail holes in BOTO Moulding and Trim Board?

Acrylic caulk, Polyurethane/urethane caulk, Auto body Bondo and Vinyl spackle/painter’s putty may be used for filling trim nail holes.

Related Products
Feedback: