Home > Product > PVC Trim

PVC Trimboard

PVC Trimboard
available on thick 3/8'', 1/2'', 5/8'', 3/4'', 1'', width 2 1/2”, 3 1/2”, 4 1/2” ,5 1/2” , 7 1/4”, 9 1/4”, 11 1/4” , length is flexible.
Product Details:

PVC Trimboard

Products

BOTO PVC trimboard is high-performance trim product, it can be sealed edges based on your requirement.BOTO trim board can be easily installed and processed with standard wood woking tools, saving you time and labor costs. It's moisture and insect resistant, doesn't require paint for protection, and suitable for ground and masonry contact. Our trimboards can be ordered either Smooth/Smooth or Smooth/Timber, available on thick 3/8'', 1/2'', 5/8'', 3/4'', 1'', width 2 1/2", 3 1/2", 4 1/2" ,5 1/2" , 7 1/4", 9 1/4", 11 1/4" , length is flexible.

Tips for filling nail holes in PVC trimboard:

-Use a 2-part epoxy nail-hole filler made for PVC.

-Using your hands, blend the two different epoxy components until the color is evenly mixed.

-Only mix as much epoxy as you can use in fifteen minutes.

-Applcation: For small holes use your finger. For larger holes use a 1-inch putty knife.

-Completely fill the nail holes, leaving them slightly crowned to sand after the epoxy sets. Or, work it as smooth as possible by shaving it off with a putty knife or working it in with your fingertips.

-For sanding, use 100 to 120 grit sandpaper with light pressure.

-Use a dry rag to clean away any dust.


Tips for painting PVC trimboard:

-Always paint PVC for mildew and dirt resistance.

-Don't use a primer.

-Use a 100% Acrylic paint.

-Spot prime large nail holes with the Acrylic paint.

pvc trimboard



pvc trimboard

Hot Tags: pvc trimboard, China, manufacturers, suppliers
Related Products
Feedback: