Home > Product > PVC Trim

Smooth Matte PVC Trim

Smooth Matte PVC Trim
White smooth matte PVC trim is high-performance trim product, it can be sealed edges based on your requirement.BOTO trim board can be easily installed and processed with standard wood woking tools, saving you time and labor costs.
Product Details:

Smooth Matte PVC Trim

Product Description

White smooth matte PVC trim is high-performance trim product, it can be sealed edges based on your requirement.BOTO trim board can be easily installed and processed with standard wood woking tools, saving you time and labor costs. It’s moisture and insect resistant, doesn’t require paint for protection, and suitable for ground and masonry contact. Our trimboards can be ordered either Smooth/Smooth or Smooth/Timber, available on thick 3/8'', 1/2'', 5/8'', 3/4'', 1'', width 2 1/2”, 3 1/2”, 4 1/2” ,5 1/2” , 7 1/4”, 9 1/4”, 11 1/4” , length is flexible.



Specification

Nominal Thickness

5/4''

Nominal Width

6"

Board Length

18''

Actual Thickness

1"

Actual Width

7-1/4''

Species/Material

PVC

Finish/Color

White

Board Edge

Square Edge

Board Surface

Square Edge

Nominal Size

5/4" x 6"



Application Show

PVC Trim is easy to work similar to wood, but much less maintenance than wood.

BOTO Trim is available with a smooth finish on both sides, or texture on one side and smooth on the other.

BOTO PVC trim is high-performance trim product, it can be sealed edges based on your requirement.

Over time, dirt will collect on the edges but a sealed edge allows the dirt to be washed off easily.






How To Bend PVC Trim

Things you will need: heat gun, clamps, safety goggles, gloves, tape measure, pvc trim


Because of PVC Trim's low maintenance and durability, PVC trim continues to grow in popularity. Once installed, PVC trim lasts considerably longer than wood and poses few hassles. The installation process for PVC trim is similar to the method for wood trim, including the use of the same caulk and sealants. PVC trim has the ability to bend, allowing it to be used in many types of installation situations. Homeowners can perform the bending technique easily. Follow standard safety procedures. The heat used to bend the trim can be extremely dangerous.


Determine the size of the area where the bent piece of trim is going to be installed. Measure the area with a tape measure to determine the angle of the bend and how it is going to be made.


Select the appropriate piece of molding. Place it on a table or flat surface. Turn on the heat gun. Start on one end of the trim, working toward the other. Do not stay in one place too long, as the trim will burn.


When the PVC trim has been heated up enough begin forming the trim into the proper shape with clamps. Clamp the trim down to the table at the proper spot. Continue heating slowly until the form has bent into place.


Allow the PVC at least an hour to cool down before touching it. The trim will be extremely hot. Repeat this process for any other pieces of trim that need to be bent.

Hot Tags: smooth matte pvc trim, China, manufacturers, suppliers
Related Products
Feedback: